S
t
e
p
14
S
t
e
p
13
Page 12
fantasticfurniture.com.au
Th
is
is
h
ow
a ca
m
nut
works
........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Place the Top Panel (P1) onto the unit as shown.
Using the Phillips Head Screwdriver, insert 8x Cam Nuts (H2) into the Left and
Right Side Panels (P2 & P3) and Centre Panel (P5) as shown, ensuring the arrows
point towards the incoming Cam Bolts. Tighten the Cam Nuts (H2) to secure.
Attach the Top Panel Rail (P4) to the Top Panel (P1) using 4x Large Screws (H4),
tightening with the Phillips Head Screwdriver.
You will need:
4 x Large
Screws (H4)
Phillips Head
Screwdriver
8 x Cam Nuts
(H2)
Using the pre-drilled holes on the Centre Shelf (P6) as a guide, secure the Back
Panels (P9x2) to the back of the unit with 4x Back Panel Screws (H5), tightening
with the Phillips Head Screwdriver.
4 x Back Panel
Screws (H5)
You will need:
Phillips Head
Screwdriver
(P1)
(P2)
(P9)
(P9)
(P9)
(P9)
(H2)x8
(H5)x4
(H5)
(P4)
(P3)
