(P18)
(P17)
(P14)
(P15)
(P16)
(P15)
(P16)
You will need
Step 11
Step 12
H4
H4
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 4 x Cam Nuts (H4) into Left & Right Drawer Sides (P15&P16) and attach to
Drawer Front (P14) by tightening Cam Nuts with the Phillips Head Screwdriver.
Attach Drawer Back (P18) to Left & Right Drawer
Sides (P15&P16) with 4 x Screws (H17) by tightening
with the Phillips Head Screwdriver. Before securing - Ensure the Bottom
Panel lines up with the grooves the whole way around the drawer.
H17
Ensure laminated
side of panel is
facing inwards.
4 x Cam Nuts
(H4)
Phillips Head
Screwdriver
Slide the Drawer Base (P17) into the grooves of Left & Right Drawer Sides (P15&P16) as shown.
Phillips Head
Screwdriver
You will need
Step 13
4 x Screws
(H17)
(P15)
(P16)
fantasticfurniture.com.au
PAGE 10
