Page 12
Step 7
Insert 4 x Cam Nuts (H5) into 2 x Centre Panels (P8).
Rotate the Cam Nuts so the arrows point towards the incoming bolts.
Secure 2 x Centre Panels (P8) to Top Panel (P3) by t
ightening the Cam Nuts with
a Phillips Head Screwdriver.
Secure the
Side Panels (P6 & P7)
to
Centre Shelf (P4) with 4 x Bolts (H1),
tightening with the Allen Key (H12).
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
