You will need
Step 3
Step 4
You will need
Attach 8 x Cam Bolts (H3) to Left & Right Side Panel (P3 & P4) by tightening with the Phillips
Head Screwdriver.
Insert 4 x Cam Nuts (H4) and 2 x Dowels (H1)
into Rails (P6 x 2 & P7) as shown. Rotate the
cam nuts so the arrows point towards the
incoming cam bolts. Attach Rails (P6 x 2 & P7)
to Right Side Panel (P4) by tightening all cam nuts
with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
4 x Cam Nuts
(H4)
Phillips Head
Screwdriver
2 x Dowels
(H1)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
(P3)
(P4)
(P7)
(P6)
(P6)
(P4)
fantasticfurniture.com.au
fantasticfurniture.com.au
Page 6
8 x Cam Bolts
(H3)
H3
H3
H3
H3
H3
H1
H1
H4
H4
H3
H3
H3
H4
