(P6)
(P4)
(P5)
(P3)
(P1)
(P1)
You will need
Step 1
Step 2
You will need
Attach 8 x Cam Bolts (H3) to Top Panel (P1) as shown by tightening with the
Phillips Head Screwdriver.
fantasticfurniture.com.au
Page 5
Phillips Head
Screwdriver
Insert 8 x Dowels (H1) into Top Panel (P1). Insert 8 x Cam Nuts (H4) into Left & Right Side
Panels (P3 & P4) and Dividers (P5 & P6) as shown. Rotate the cam nuts so the arrows
point towards the incoming cam bolts. Attach Left & Right Side Panels (P3 & P4) and
Dividers (P5 & P6) to Top Panel (P1) by tightening all cam nuts with the Phillips
Head Screwdriver.
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
H3
H3
H3
H3
H3
H3
H3
H3
Phillips Head
Screwdriver
8 x Cam Bolts
(H3)
8 x Cam Nuts
(H4)
8 x Dowels
(H1)
H1
H1
H4
H4
H1
H1
H1
H1
H1
H1
H4
H4
H4
