(P1)
Page 11
fantasticfurniture.com.au
Insert 2 x Dowels (H1) into Bottom Panel (P2). Insert 1 x Cam Nut (H4) into Support Leg (P9).
Rotate the cam nut so the arrow points towards the incoming bolt. Attach Support Leg (P9)
to Bottom Panel (P2), then tighten the cam nut with a Phillips Head Screwdriver.
You will need
Step 14
Phillips Head
Screwdriver
1 x Cam Nut
(H4)
2 x Dowels
(H1)
Required
Two People
(P3)
(P3)
(P4)
(P4)
You will need
Step 13
Phillips Head
Screwdriver
10 x Cam Nuts
(H4)
Carefully turn the coffee table over. Insert 10 x Cam Nuts (H4) into Rails (P3 x 2 & P4 x 2).
Rotate the nuts so the arrows point towards the incoming bolts. Attach Top Panel (P1) to
Rails (P3 x 2 & P4 x 2) as shown, tightening the cam nuts with the Phillips Head Screwdriver.
H4
H4
H4
H1
H1
(P9)
(P2)
H4
H4
H4
