Step 1
PAGE 5
Step 2
4
x Big Cam
Bolt (H1)
1
x Screw
(H7)
1
x Wall
Bracket (H13)
Phillips head
screwdriver
You will need
4
x Big Cam
Bolt (H1)
8
x Slide
(H17)
2 x Big Wood
Dowel (H4)
Phillips head
screwdriver
You will need
12
x Screw
(H7)
Mallet
Screw 4 x Big Cam Bolts (H1)
into Top Panel (P1) as shown.
Fasten Wall Bracket (H13) on
Top Panel (P1) with Screw (H7).
Do not fully tighten the Screw (H7).
(P1)
(P3)
(P3)
Separate the 8 sets of Slide Runners (H17-2) and Slide Tracks (H17-1)
from Slides (H17) by following the steps below:
Extend the Slide Runner all the way forward.
Press the plastic release lever of the slide down and
pull the Slide Runner (H17-2) completely out.
Insert 2 x Big Wood Dowels (H4) into Left Side Panel (P3).
Screw 4 x Big Cam Bolts (H1) into Left Side Panel (P3).
Attach 4 x the Separated Slide Tracks (H17-1) onto
Left Side Panel (P3) with 12 x Screws (H7).
