Page 7
Step 3
Step 4
You will need
4 x Dowels
(H1)
(H3)
fantasticfurniture.com.au
4 x Cam Nuts
(P5)
(H3)
(H3)
(H3)
(H3)
(P1)
(P5)
(P2)
You will need
Phillips head
screwdriver
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
Insert 4 x owels (H3) into ix ed helf (P5 ).
D
S
F
E nsure the raw edges of side & shelf
panels are at the back of the unit and Cam
Nuts are on the underside of the shelf
before securing
(H2)
(H1)
(H1)
(H1)
Insert 4 x Cam Nuts (H1) into Fixed Shelf (P5).Rotate the Cam Nuts so the arrows point
towards the incoming cam bolts.Attach Left & Right Side Panels (P1&P2) to Fixed Shelf
(P5) by tightening the Cam Nuts with the Phillips Head Screwdriver.
