Page 7
fantasticfurniture.com.au
Step 5
Step 6
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
You will need
Phill
i
ps
H
ead
Screwdriver
6 x Cam Nuts
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
You will need
Phill
i
ps
H
ead
Screwdriver
7 x Cam Nuts
(H4)
(H4)
(H4)
(H4)
(H4)
(H4)
(H4)
P3
P4
P5
P6
(H4)
(H4)
(H4)
(H4)
(H4)
(H4)
P5
P3
P4
P1
Insert 6 x Cam Nuts (H4) into the Ba
ck
Panel (P5) and Support Panel (P6).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach the Base Panel (P5) and Support Panel (P6) to the Left Side Panel (P3) and Right Side Panel
(P4
)
, by tightening all Cam Nuts with the Phillips Head Screwdriver.
Carefully lift the unit onto the Top Panel (P1) as shown.
Insert the 7 x Cam Nuts into panels (P3, P4 & P5) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach panels (P3, P4 & P5) to the Top Panel (P1), by tightening all Cam Nuts with the
Phillips Head Screwdriver.
