4 x Long Bolts
M6x50mm (H2)
1 x Allen Key
(H7)
- Secure the head board (P1) to the side rails (P3) & (P4) with 4 x long bolts (H2) using an allen
key (H7).
Step 3
Step 4
H7
H2
H2
H2
H2
P1
P3
P4
4 x Short Bolts
(H8)
P1
P3
P4
H8
H8
- Attach centre support (P5) to head board (P1).
- Align holes and turn the cam nuts on centre support (P5) clockwise with a
phillips head screwdriver
to lock in position.
- To secure the side rails (P3) & (P4) to the head board (P1), insert 4 x short
bolts (H8) and tighten with a phillips head screwdriver.
P5
fantasticfurniture.com.au
Page 6
You will need
You will need
Phillips Head
Screwdriver
This is how a cam nut works...
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Two People
e uired
H2
Ensure slot is facing incoming bolt
