Page 12
fantasticfurniture.com.au
You will need
You will need
Step 11
Step 12
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
P19
Phillips Head
Screwdriver
10 x Dowels (H3)
(H1)
10 x Cam Nuts
P21
(P20) x2
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut.You
then turn the cam
nut so it tightens
over the bolt.
Insert 10 x Dowels (H3) into Robe Fixed Panel (P19), 2 x Robe Front Support Panels (P20) and
the Robe Back Support Panel (P21).
Insert 10 x Cam Nuts (H1) into Panels (P19, P20 & P21). Rotate the Cam Nuts so the arrows are
facing the incoming Bolts.
Attach Panels (P19, P20, P21) to Left Robe Side Panel (P13), by aligning the holes
and tightening the Cam Nuts with the Phillips Head Screwdriver.
P13
P19
P21
P20
P20
