Page 5
fantasticfurniture.com.au
Step 1
You will need
16 x Flat
Washer
s
(H2)
4 x Leg
s
(P2)
4 x Bolt
s
(H1)
If the bolt can’t be fitted into
the hole well,
please slope the leg until the
bolt can be inserted into the
hole completely as picture
showed, then screw the bolt to
the bottom.
Phillips
H
ead
S
crewdriver
1 x Allen Key
(H4)
(H3)
8 x Screws
To attach a leg to the chair, first
align the leg plate to the holes on
the underside of the chair.
Ensure that the leg is facing the correct
way.
First attach the leg with 2 x bolts (H1) and 2 x washers (H2) by
tightening with the allen key (H4)
as shown
. Then fix 2 x screws
(H3) and 2 x washers (H2) through the remaining 2 holes,
tightening with the phillips head screwdriver.
Repeat this for the
remaining legs. Ensure to tighte
n bolts
and screws
fully.
