www.fantasticfurniture.com.au
PAGE 5
You will need
Step 1
Step 3
You will need
Phillips head
screwdriver
4 x Small
Dowels (H1)
2 x Long
Screws (H6)
4 x Cam Bolts
(H7)
Phillips head
screwdriver
You will need
Step 2
4 x Cam Nuts
(H8)
Flat head
screwdriver
4 x Dowels
(H2)
H6
(P5)
(P3)
(P4)
(P6)
(P6)
(P8)
(P7)
(P7)
(P8)
H7
H7
H7
H7
H8
H8
H8
H8
H2
H2
H2
H2
H1
H1
H1
H1
Insert 4 x Dowels (H2) into Shelf Panel (P5).
Insert 4 x Cam Nuts (H8) into the holes of Shelf Panel (P5).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Rails (P7, P8) to Shelf Panel (P5), then tighten the cam nuts using a Flat head screwdriver.
Attach 4 x Cam Bolts (H7) into Rails (P7, P8) with a Phillips head screwdriver.
Insert 4 x Small Dowels (H1) into Shelf Panels (P3, P4).
Attach Rails (P6) to Shelf Panels (P3, P4) with 2 x Long Screws (H6).
Tighten Screws using a Phillips head screwdriver.
H6
Rounded
corner
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
