www.fantasticfurniture.com.au
PAGE 6
Attach 3 x CR runner tracks (H7) to right side panel (P3) with 9 x small screws (H5).
Insert 2 x dowels (H1) and 2 x cam bolts (H3) into right side panel (P3) as shown.
Tighten with a Phillips head screwdriver.
Attach rails (P5) to left side panel (P2) and right side panel (P3) with 4x cam nuts (H4).
Tighten with a Phillips head screwdriver.
You will need
Step 3
3 x CR Runner
Tracks (H7)
Step 4
(P3)
H3
H5
H7
(P3)
You will need
4 x Cam
Nuts (H4)
(P5)
(P2)
H4
(P5)
H4
(P5)
Phillips head
screwdriver
9 x Small
Screws (H5)
2 x Cam
Bolts (H3)
2 x Dowels
(H1)
H1
Phillips head
screwdriver
H7
CR
H5
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
