Step 10
Page 10
fantasticfurniture.com.au
You will need
With assistance, position top panel (P1) onto panels (P3, P4, P5) as shown.
Make sure the groove in top panel (P1) is on the same side as the side panels (P3).
Insert 6 x cam nuts (H2) into panels (P3 x 2, P4). Rotate the cam nuts so the arrows
point towards the incoming cam bolts and turn clockwise to lock with a flat head screwdriver.
Step 11
You will need
Flat Head
Screwdriver
6 x Cam
Nuts (H2)
(P3)
(P4)
(P3)
(P1)
H2
H2
H2
H2
H2
H2
Required
Two People
(P5)
If necessary, gently adjust the top panel (P1) sideways in either direction
until XX and YY are equal.
Holding it in place, fix 6 x back panel connectors (H7) to assembled unit
with 6 x screws (H6) as shown, using a phillips head screwdriver.
Phillips Head
Screwdriver
6 x Screws
16mm (H6)
6 x Back Panel
Connectors (H7)
Required
Two People
H7
H7
H7
H7
H7
H7
(P5)
(P1)
(P1)
XX=YY
XX
YY
XX
YY
H7
H7
H6
(P5)
(P1)
(P5)
(P1)
