This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
www.fantasticfurniture.com.au
PAGE 5
Step 1
2 x Cam Nuts
(H4)
Flat head
screwdriver
Insert 4 x Dowels (H1) into Side Panels (P2, P3).
Attach 8 x Cam Bolts (H3) into Side Panels (P2, P3) as shown.
4 x Dowels
(H1)
You will need
8 x Cam Bolts
(H3)
Phillips head
screwdriver
Step 2
You will need
2 x Cam Bolts
(H3)
Phillips head
screwdriver
H3
H1
H3
H4
H3
H3
H3
H3
H3
H3
H3
H1
(P2)
(P4)
(P4)
(P6)
(P3)
Attach 2 x Cam Bolts (H3) into Rail (P4) as shown.
Insert 2
x
Cam Nuts (H4) into the holes
of Bottom Panel (P6).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Rail (P4) to Bottom Panel (P6), then tighten the cam nuts.
Bottom is flash.
H1
H3
H4