You will need
Step 1
Phillips Head
Screwdriver
Step 2
You will need
Phillips Head
Screwdriver
Secure 24 x Cam Bolts (H3) to
Legs (P4, P5, P6, P7) by tightening
with the Phillips Head Screwdriver.
Attach 4 x Plastic Glides (H18) to
Legs(P4&P5&P6&P7) by a Hammer.
(P4)
(P4)
(P2)
(P3)
(P7)
(P6)
(P5)
(P5)
(P6)
(P7)
H3
H4
H4
H1
H1
H4
H4
H1
H1
H3
H3
H3
24 x Cam Bolts
(H3)
24 x Cam Nuts
(H4)
16 x Dowels
(H1)
fantasticfurniture.com.au
Page 5
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 16 x Dowels (H1) into the holes
of Side Panels (P2&P3) as shown. Insert
24 x Cam Nuts (H4) into the holes of Side
Panels (P2& P3) as shown. Rotate the cam
nuts so the arrows point towards the incoming
cam bolts. Attach Legs (P4&P5) to Left Side Panel (P2)
and Legs (P6&P7) to Right Side Panel (P3). Tightening Cam Nuts
with the Phillips Head Screwdriver.
4 x Plastic
Glides (H18)
H18
H18
H18
H18
Hammer
