(P10)
(P3)
(P6)
(P4)
(P9)
(P8)
(P7)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
H4
H4
H2
H2
H4
H4
H3
H3
H3
H3
H3
H3
H3
H3
Attach 8 x Cam Bolts (H3) into Legs (P7, P8, P9, P10) using a Phillips head screwdriver.
Insert 4 x Small Dowels (H2) into the holes of Shelf Panel (P6) as shown.
Insert
4
x
Cam Nuts (H4)
into into the holes of Shelf Panel (P6).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Dividers (P3, P4) to Shelf Panel (P6),
then tighten the cam nuts using a Flat head screwdriver.
8 x Cam Bolts
(H3)
You will need
Step 3
Phillips head
screwdriver
www.fantasticfurniture.com.au
PAGE 6
You will need
Step 4
4 x Cam Nuts
(H4)
Flat head
screwdriver
Make sure raw edge
is facing up.
4 x Small
Dowels (H2)
