You will need
Step 3
Step 4
You will need
Insert 6 x Dowels (H1) and 6 x Cam Nuts (H4) into Shelf Panels (P8x3) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach
Shelf Panels (P8x3) to Left Side Panel (P2) by tightening the Cam Nuts (H4) with
the Phillips Head Screwdriver.
Insert 6 x Dowels (H1) and 6 x Cam Nuts (H4) into Shelf Panels (P8x3) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach
Shelf Panels (P8x3) to Right Side Panel (P3) by tightening the Cam Nuts (H4)
with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
6 x Dowels
(H1)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
H1
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H1
H1
H1
H1
H1
(P8)
(P8)
(P8)
(P8)
(P8)
(P8)
(P2)
(P3)
fantasticfurniture.com.au
fantasticfurniture.com.au
Page 6
6 x Cam Nuts
(H4)
6 x Dowels
(H1)
6 x Cam Nuts
(H4)
Make sure cam
nut hole face top
Back panel
slot
Make sure cam
nut hole face top