(P2)
(P3)
(P2)
(P3)
(P4)
H2
H1
H1
H1
H1
H2
H4
H4
H10
H10
H3
H3
H1
H1
H2
Squeeze Glue (H10) into the dowel holes in Short Apron (P4).
Insert 2 x Cam Nuts (H3) into the holes of Short Apron (P4) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Legs (P2, P3) to Short Apron (P4), then tighten the cam nuts using a Phillips
head screwdriver. Repeat this step with other Legs (P2, P3) and Short Apron (P4).
Squeeze Glue (H10) into dowel holes in Legs (P2, P3) and insert 4 x Dowels (H1).
Screw 2 x Cam Bolts (H2) into place using a Phillips head screwdriver.
Insert 2 x Long Bolts into Legs (P2, P3) as shown.
Repeat Step 1 for other Legs (P2, P3).
Phillips Head
Screwdriver
Phillips Head
Screwdriver
You will need
Step 1
4 x Cam Bolts
(H2)
8 x Dowels
(H1)
1 x Glue
(H10)
4 x Long Bolts
(H4)
1 x Glue
(H10)
You will need
4 x Cam Nuts
(H3)
Step 2
fantasticfurniture.com.au
Page 5
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
