Insert 2 x Dowels (H1) into Side Panel (P10) and 2 x Dowels (H1) into Side Middle Panel (P6)
then attach to Shelf Bottom Panel (P8) with 4 x Screws (H5) by tightening with the Phillips Head
Screwdriver. Repeat these steps for second set of panels.
www.fantasticfurniture.com.au
PAGE 7
Step 5
You will need
Phillips head
screwdriver
(P7)
(P6)
(P10)
(P6)
(P10)
(P8)
8 x Cam Nuts
(H4)
8 x Dowels
(H1)
You will need
Phillips head
screwdriver
8 x Dowels
(H1)
8 x Screws
(H5)
Insert 2 x Dowels (H1) into Side Panel (P10) and 2 x Dowels (H1) into Side Middle Panel (P6) then
attach to Shelf Top Panel (P7) as shown. Insert 2 x Cam Nuts (H4) into Side Panel (P10) and 2 x Cam
Nuts (H4) into Side Middle Panel (P6). Ensure the arrows on the cam nuts are facing towards the
incoming cam bolts and secure by tightening cam nuts with a Phillips Head Screwdriver. Repeat these
steps for second set of panels.
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
x2
x2
Step 6
H1
H1
H1
H1
H4
H4
H4
H5
H5
H5
H5
H1
H1
H1
H1
H4
H4
