Insert 2 x Long Dowels (H18) into Dividers (P7&P8). Insert 2 x Cam Nuts (H4)
into Rail (P9). Rotate the nuts so the arrows point towards the incoming bolts.
Attach Dividers (P7&P8) to Rail (P9) by tightening all nuts with the Phillips Head
Screwdriver.
(P7)
(P8)
(P8)
(P8)
(P9)
fantasticfurniture.com.au
Page 6
CL
H5
H6
H6
CR
H5
H7
H7
Attach 2 x Cam Bolts (H3) , 1 x CL Runner Track (H6) and 1 x CR Runner
Track (H7) to each side of Divider (P8) with 6 x Small Screws (H5) by tightening
with the Phillips Head Screwdriver.
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
FLIP
H5
H5
H3
H3
H4
H18
H18
H4
Step 4
You will need
2 x Cam Nuts
(H4)
Phillips Head
Screwdriver
2 x Long
Dowels (H18)
1 x CL Runner
Track (H6)
6 x Small
Screws (H5)
1 x CR Runner
Track (H7)
2 x Cam Bolts
(H3)
Step 3
You will need
Phillips Head
Screwdriver
