You will need
Step 3
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Step 4
You will need
Attach 10 x Cam Bolts (H3) to Left & Right Side Panels (P2&P3) by tightening the Phillips
Head Screwdriver.
Insert 1x Dowel (H1) into Left Side Panel (P2). Insert 4 x Cam Nuts (H4) into Rail & Back
Panel & Shelf Panel (P6&P4&P7) as shown. Rotate the cam nuts so the arrows point
towards the incoming cam bolts. Attach Rail & Back Panel & Shelf Panel (P6&P4&P7)
to Left Side Panel (P2) by tightening all cam nuts with the Phillips Head
Phillips Head
Screwdriver
5 x Cam Nuts
(H4)
Phillips Head
Screwdriver
1 x Dowel
(H1)
(P2)
(P4)
(P7)
(P6)
(P2)
(P3)
fantasticfurniture.com.au
fantasticfurniture.com.au
Page 6
10 x Cam Bolts
(H3)
H3
H3
H3
H3
H1
H4
H4
H4
H4
H4
H3
H3
H3
H3
H3
H3
