(P4)
You will need
Step 7
fantasticfurniture.com.au
Page 8
4 x Bolts
(H1)
(P1)
(P2)
(P2)
(P1)
H1
H1
You will need
Step 8
4 x Screws
(H2)
Phillips Head
Screwdriver
H6
H4
2 x Hexagonal
Nuts (H4)
Attach the 2 x support slats (P7) to centre rail (P4) using 2 x long bolts (H3), 2 x washers (H6)
and 2 x hexagonal nuts (H4), tightening with the spanner (H12) and allen key (H13).
Attach the 2 x support slats (P7) to the 2 x side rails (P3) using 4 x screws (H2), tightening
with a phillips head screwdriver. Ensure the 3 x adjusters (H5) in the 3 x support legs (P5)
are retracted so they are not touching the floor. With assistance, move the bed into
its final position. Once the bed is in its final position, extend the 3 x adjusters (H5) in
the 3 x support legs (P5) so they are sitting firmly on the floor.
Attach centre rail (P4) to headboard (P1) and
footboard (P2) using 4 x bolts (H1), tightening
with the allen key (H13).
2 x Washers
(H6)
H3
2 x Long Bolts
(H3)
(P4)
(P7)
(P7)
(P3)
(P3)
H2
H2
H2
H12
H2
H3
H6
H4
H4
H3
H6
1 x Spanner
(H12)
H13
1 x Allen Key
(H13)
H13
Required
Two People
1 x Allen Key
(H13)
