Step 7
You will need
4 x Magnetic Catch
(H5)
4x Plastic Sleeve
(H8)
Phillips Head
Screwdriver
Fasten magnetic catch (H5) to the Top Panel(P3) a
g
(
)
p
(
)
Insert 1x Plastic Sleeve (H8) each into the Top (P3)
Place the Door (P11) with its hinge into the Plastic S
Loosen the Door Hinge (H4) on the top of Door (P9
Insert the top hinge into the plastic sleeve (H8) on t
Slide the top corner of Door (P9) into the hinge.
Tighten the bolts on the door hinge with a Phillips H
Repeat process for other door
Step 8
You will need
2x
Wall
Straps
(H11)
2x Washers (H10)
Phillips Head
Screwdriver
It is recommended that the unit is fixed to a wal
As wall materials vary screws for fixing to wall are n
As wall materials vary, screws for fixing to wall are n
For advice on suitable screw systems, contact your
specialized dealer.
Move the cabinet to the desired position against a w
Mark a line on the wall at 2 sides of top edge of the
Remove the cabinet, mark a point about 10 mm bel
www.fantasticfurniture.com.au
Attach the wall strap (H11) with the appropriate scre
and washer (H10).
H4
H8
H5
H5
H8
H4
and Base (P1)
(
)
) and Base (P1).
Sleeve (H8) in Base (P1)
9) with a Phillips Head Screwdriver.
the Top Panel (P3).
Head Screwdriver ensuring contact with the hinge plate.
H11
H11
l.
not included
not included.
r local
wall.
cabinet.
low the line.
PAGE 8
ew system
