fantastic furniture Elevate, Руководство по сборке, Страница: 9 / 15

Step 5
Page 9 fantasticfurniture.com.au
You will need
Insert hexagonal shaft (P8) into SYNC rod (P4) as shown.
Mount the SYNC rod (P4) onto motor hexagonal shaft on right leg (P6) as shown.
Insert 1 x bolt (H14) into SYNC rod (P4) as shown, by tightening with allen key (H7).
Insert hexagonal shaft (P8) into the hexagonal hole on the left leg (P5).
if needed, use allen key (H13) to slightly adjust the angle of hexgonal hole on the left leg (P5)
anticlockwise, so that the hexagonal shaft (P8) can be inserted into the hole.
Insert 1 x bolt (H14) into SYNC rod (P4) as shown, by tightening with allen key (H7).
Check to be sure the left & right leg are aligned.
(P8)
1 x Allen Key
6mm (H13)
1 x Allen Key
2mm (H7)
(P4)
2 x Bolts
3mm (H14)
3
10m
m
1 2
4
H7
H7
H14
H14
H13
(P6)
(P5)
(P4)
(P4)
(P5)
(P6)
(P4)
(P8)
(P5)