This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Step 4
You will need
4 x Dowels
(H1)
Step 3
You will need
4 x Cam Nuts
(H3)
Phillips Head
Screwdriver
Insert 4 x Cam Nuts (H3) into the holes of Shelf Panel (P2) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Side Panels (P3, P4) to Shelf Panel (P2),
then tighten the cam nuts using a Phillips head screwdriver.
Insert 4 x Dowels (H1) into Side Panels (P3, P4).
Put Dividers (P5) to the place as shown.
H1
H1
H1
H1
(P4)
(P3)
(P5)
(P5)
fantasticfurniture.com.au
fantasticfurniture.com.au
Page 6
H3
H3
(P4)
(P3)
(P2)
H3
H3
