Step 3
You will need:
8 x Screws
(H6)
2 x Flat
Connetors
(H12)
3 x Plastic
Glides
(H13)
2 x Long
Screws
(H7)
Attach 2 x Flat Connectors (H12) to Bedfoot (P2) with 8 x Screws (H6).
Attach Supporter (P15) to Bedfoot (P2) with 2 x Long Screws (H7).
Then hammer 3 x Plastic Glides (H13) on the bottom of Bedfoot (P2).
Page 5
(P7)
2 x Cam Nuts
(H4)
You will need:
Step 4
2 x Small
Dowels
(H2)
Insert 2 x Small Dowels (H2) into Side Rails (P3).
Insert 2 x Cam Nuts (H4) into the holes
of Clapboard (P7).
Rotate the cam nuts so the arrow point towards the incoming cam bolts.
Push Side Rails (P3) into place and tighten the cam nuts.
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P3)
(P3)
H2
H4
Make sure the bottom of the “U” shape is
facing to the bottom rough side of Bedfoot (P2).
(P2)
(P15)
H6
H6
H13
H13
H13
H7
H7
H6
H6
H12
H12
