You will need
Step 1
You will need
Step 2
www.fantasticfurniture.com.au
PAGE 5
H3
H3
2 x Cam Nuts
(H4)
Flat head
screwdriver
2 x Dowels
(H1)
2 x Cam Bolts
(H3)
Phillips head
screwdriver
(P4)
(P3)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P3)
H4
H1
H1
H4
Attach 2 x Cam Bolts (H3) into Back Panel (P3) using a Phillips head screwdriver.
Insert 2 x Dowels (H1) into the holes of Back Panel (P3) as shown.
Insert
2
x
Cam Nuts (H4)
into the holes of Bottom Panel (P4).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Bottom Panel (P4) to Back Panel (P3),
then tighten the cam nuts using a Flat head screwdriver.
