Step3
Two People
You will need
�
Required
4 x Cam Nuts
(H2)
·,
Phillips head
screwdriver
P2
Insert 4 x Cam Nuts (H2) to Panels (P1), rotate the Cam Nuts,
so the arrow point towards the incoming Cam Bolts, then attach
(P2) & (P3) to (P1), turn the Cam Nuts clockwise to tighten.
Step4
You will need
�
7 x Cam Nuts
(H2)
·,
Phillips head
screwdriver
Two People
P1
Thi.s i.s how a cam nuts works ........
The head of the cam
bolt goes into the
open mouth of the
cam nuts. You then
turn the cam nuts so it
tightens over the bolt.
Insert 7 x Cam Nuts (H2) to Panels (P1), (P2) & (P3), rotate the
Cam Nuts, so the arrow point towards the incoming Cam Bolts.
Attach (P1), (P2) & (P3) to (P4) as shown, turn the Cam Nuts
clockwise to tighten.
Required
www.fantasticfurniture.com.au
R
Fantastic
Furniture
Page8
