With assistance, align 2 x Table Legs (P3, P4) to Table Leg Frame (P2) as shown. Attach the 2 x
Table Legs (P3, P4) to the Table Leg Frame (P2) using 6 x Bolts (H1), screw with the Allen Key (H4).
Do not fully tighten the Bolts (H1).
Gently lay Table Top (P1) upside down on a soft surface.
Align assembled Table Leg Frame (P2) onto the Table Top (P1) using 8 x Bolts (H2) and
8 x Washers (H3) tightening with the Allen Key (H4).
Do not fully tighten the Bolts (H2)
Attach 4 x Levelling Feet (H5) to the bottom of each Leg (P2, P3), by screwing clockwise.
With assistance, carefully turn the table to its upright position.
Ensure the Table Frame is stable.
You may now fully tighten all Bolts (H1, H2) using Allen Key (H3).
If required, the Levelling Feet (H5) can be adjusted by turning anti-clockwise or clockwise as
required so the table is level with the ground.
6 x Bolts
(H1)
Allen Key
(H4)
8 x Bolts
(H2)
8 x Washers
(H3)
Allen Key
(H4)
Note: We recommend assembling this product on
a soft surface to avoid damaging the product.
4 x Levelling Feet
(H5)
(H5)
TWO PEOPLE
REQUIRED
TWO PEOPLE
REQUIRED
