Page 9
fantasticfmurniture.com.au
Step 9
Step 8
Attach panel (P3) to panels (P7), (P8) & (P9).
Turn the cam nut on panels (P7), (P8) & (P9) clockwise motion with a phillips
head screwdriver to lock in position.
P9
P7
P8
P3
You will need
Phillips Head
Screwdriver
P9
Begin with frame lying on its front on a soft surface.
Attach panel (P4) to panel (P7) by aligning the dowels to the holes.
Insert 2 x 45mm screws (H8) using a phillips head screwdriver.
Secure 1 x L-bracket to (P7) & (P9) with 4 x 12mm screws (H5) using a phillips
head screwdriver.
Phillips Head
Screwdriver
4 x 12mm
Screws (H5)
You will need
2 x 45mm
Screws (H8)
1 x L-Bracket
(H11)
P4
P8
P9
P7
H11
H8
H8
H11
H5
Back
Front
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
