The Installation of Back Grill:
Removed the motor shaft of the fan head cover, unscrew the triangle nut. and then three
round hole on back grill push in three pillars of front shell on motor, next, tighten the
triangle nut by clockwise. Such as photo four.
The Installation of Fan blade:
Push the groove on back of big fan blade into spacer pin on motor shaft, and tighten
small fan blade by anticlockwise. Such as photo five.
The Installation of Front Grill:
Unload the screw over card buckler place on the the front grill and push the front frill into
back grill after open the card buckler.
Adjust the card buckler and tighten them by previous unload screw. Such as photo six.
INSTRUCTIONS FOR USE
Before using the fan make sure that it is on a flat and stable surface.
Damage may occur if it is placed on an incline or decline.
Set all the switches to OFF position, then insert the plug directly into a standard AC
socket-outlet. Be sure plug fits tightly into outlet.
a. OSC
If you want to enlarge blast area in your room, press the lift pole down to let it shake
head (just left and right);
To stop oscillating, just pull the lift pole out.
b. Speed setting:
There are 3 speed choices. You can select speed by pressing the button.
Press the button on to start the fan and select the fan speed level, as per the following
sequence: 1
2
3
Press the button “OFF” to turn off the fan.
Push forward the fan head up and down can adjust the air supply angle.
