background image

See Diagram 2 

  

3    Remote Control operates Fan  

-  Remote  control  supplied  separately  not  included

  Light 

Connection              Switched Live Supply connects Brown on imput side of the

                                  receiver.

                                  Neutral Supply connects to the Blue Input of the receiver.

                                  Brown Output connects to the Brown Supply wire of the fan
                                  Blue Output connects to the Blue Supply wire of the fan

                                  

Orange Output connects to the Orange Supply wire of the fan

See Diagram 3

FOR DROP ROD STYLE OF FAN:

Once the cables of the fan 

offer the canopy up to the hanging bracket, and

have been connected

 

insert  the  canopy 

using  knurled  nut  to screw  the  plate  tight. 

decorative plate to canopy, 

Tighten all the screws 

fixing.

to ensure a good safe 

It  is  important  to  fix  the  canopy  properly  as 

this  offers  another  level  of  safety  should 

anything happen to the hanging bracket.

FOR FLUSH STYLE OF FAN:

Once  the  cables  of  the  fan  have  been 

connected  offer the canopy up to the hanging 

bracket.  Tighten  all  the  screws  to  ensure  a 

good safe fixing.

It  is  important  to  fix  the  canopy  properly  as 

this  offers  another  level  of  safety  should 

anything happen to the hanging bracket.

Содержание Kompact

















Отзывы: