8
After connecting all the wire and assembly the blades and light kit, it is a good
time to test that the fan and remote control operates correctly.
Please refer next page for R.C. setup before turn on the power.
Put the glass up to fitter and twist it
tight.
5.
Attaching the G9 light fitter and glass to the Fan
Release three screws on the bottom of switch box, put light fitter onto switch box, using
three screws to fasten light fitter. (See PIC. A), Connector earth wire of light fitter to earth
wire from switch box. Release three screws on the light fitter, connect push plug white
to white, black to black, put socket fitter onto light fitter and fasten it with three screws,
please make sure both fitter tighten enough. (See PIC. B)
PIC. A
Your fan is supplied with one G9 60W,
Install G9 bulb to socket after socket fitter
installation finished. Please do not
touch bulb with your finger, it may cause
the bulb to fail.
PIC. B
Содержание Elite Zeta
