FRX100 VA VACUUM Housing Instruction Manual 20190625
15
back of the housing. First install the anti‐glare hood over the top rail (image #3) and then
gently and carefully stretch it downwards to install it on the bottom rail, making sure it’s
sitting securely on both upper and lower rails (image #4).
e.
If using a Hand Strap, install it on the two loops found at the right side of the housing.
Please refer to the section “Hand Strap” on page 23 for further information.
f.
It is important that a first dive with the housing is always made without the camera in
order to verify that the housing watertight seal has not been affected during transport
and after long periods of storage.
Image #1
Image #2
Image #3
Image #4
