Fantasea BigEye Lens FXF80, Руководство оператора

Страница: 3 / 8

3
3. Included in Box

BigEye Lens FXF80/100/200

Neoprene Lens Cover

Secure Line

Warranty

Instruction Manual
4. Specifications

For the FujiFilm WP-FXF80, WP-FXF100 and WP-FXF200 housings

Depth rated to 60 meters / 200 feet

Field of view recovery (magnification): 105% (x 0.7)

Angle of coverage: 80 degrees

Lens material: Optical glass, hard coated plastic and anodized
aluminum

Weight: 492g

Dimensions: 157x67mm
:
5. Instructions for Use
A. Please use the utmost care and do not use excessive force when
assembling and disassembling the lens, in order to not cause any damage
to the product.
B. Attach the secure line to the lens and the housing, in order to secure the
lens to the housing.
C. During the dive, install the BigEye Lens by attaching it to the housing lens
port, as shown on the figure on the following page.
Important Notice:
Prior to installing the lens, make sure you are holding the lens according to the shape of
the lens port, so the gap designed on the lens adaptor corresponds with the housing
built-in flash diffuser. To install the lens, push it against the lens port starting from the
bottom right corner (when facing the housing) and proceeding towards the top left
corner, where the housing built-in flash diffuser is located. After lens installation, make
sure it is properly attached by gently trying to pull it out. If properly installed, the lens
should not easily come off the lens port.