4
BigEye Lens FP7000 Instruction Manual 20110523
4.
Installing Color Correction Inserts inside the BigEye Lens
a.
Color correction inserts can be installed inside the BigEye Lens FP7000 for the purpose of producing
underwater wide angle vivid and colorful images or videos. A dedicated slot was designed in order to
allow for easy installation of red or pink color correction inserts, which restore the colors absorbed
by water.
b.
The following color correction inserts can be installed inside the BigEye Lens FP7000:
i.
RedEye Insert included with the
RedEye Filter FP7000
(Cat. No. 5211)
– for restoring the red
color absorbed by blue water.
ii.
PinkEye Insert included with the
PinkEye Filter FP7000
(Cat. No. 5212)
– for restoring the pink
color absorbed by green water.
c.
In order to install a color correction insert inside the BigEye Lens, first remove the BigEye Lens from
the housing lens port.
d.
Remove the color insert from the RedEye/PinkEye Filter FP7000 by following the instructions
provided in the corresponding instruction manual.
e.
Attach the secure line to the color insert and housing, if you haven’t done so by now.
f.
Hold the BigEye Lens so that the dome is pointed downwards, the adaptor side is facing up and the
“TOP” marking is pointed towards your body.
g.
Hold the color insert above the BigEye Lens so that the secure string of the color insert is positioned
on the top left corner (image #4).
h.
Slide the right side of the color insert rightwards, into the slot of the BigEye Lens adaptor (image #5).
Make sure that the color insert tooth is inserted into the corresponding niche on the BigEye Lens
adaptor.
i.
Once the right side of the color insert is inserted all the way in, gently push the left side of the color
insert against the BigEye Lens adaptor till it clicks (image #6 on the following page). Note that if you
Image #4
Image #5
