2
SEL30M35 Lens Gear Instruction Manual 20170606
4.
Once the Lens Gear is properly installed on
the lens, follow the housing instruction
manual to install the camera inside the
housing.
5.
With the camera installed inside the housing
and prior to closing the housing, test the
housing Lens Dial by turning it in both
directions (clockwise and counterclockwise)
to ensure proper operation (Fig.4). Make sure
that turning the housing Lens Dial doesn’t tilt
the Lens Gear. If required, reinstall the Lens
Gear on the lens by following steps 2-3
above.
6.
Close, seal and lock the housing by following
the housing instruction manual.
CARE & MAINTENANCE
1.
Please use the utmost care and do not use excessive force when assembling and disassembling the different
parts, in order not cause any damage to the products.
2.
Keep the Lens Gear away from extreme high temperatures, as under direct sunlight, since it might damage
the product.
3.
Do not clean the Lens Gear with any chemical solvents or other materials, which might cause damage to the
product.
4.
When storing the Lens Gear and during transportation, make sure that it is properly protected in order to
prevent deformation of the product.
5.
Do not store the Lens Gear in presence of chemicals, solvents or fuels.
For further information -
www.fantasea.com, [email protected]
Fig.2
Fig.3
Lens Gear is tilted
Lens Gear is pushed
all the way towards
the camera body
Fig.4
