e.
During the dive, in order to disable the
flash diffuser, the diffuser can be turned
clockwise around the lens port until it
reaches a horizontal position and clicks
(image #21). This rest-point of the
diffuser eliminates the need to
completely remove it from the housing
during the dive.
4.
It is best to set the camera flash mode to “Flash
Always” as artificial light is required in most
compositions for the purpose of
reproduction. This will ensure the
ambient light available. Please refer to the
regarding such settings.
5.
Turn the Flash Pop-Up dial counterclockwise in order to pop up the camera built
6.
Note that once the camera built
Flash / Right
control and selecting “flash disabled” on the flash mode menu
Up control clockwise will not have any effect on the built
When shooting in M (Manual),
please take into consideration that once the flash has been popped up
Therefore, in such cases, it's recommended to switch to Auto
after it has been popped up.
FRX100 VA R Housing Instruction Manual
23
During the dive, in order to disable the
flash diffuser, the diffuser can be turned
clockwise around the lens port until it
reaches a horizontal position and clicks
point of the
diffuser eliminates the need to
remove it from the housing
It is best to set the camera flash mode to “Flash
is required in most
compositions for the purpose of color and light
nsure the built-in camera flash fires on every image taken
Please refer to the camera instruction manual for further instructions
Up dial counterclockwise in order to pop up the camera built
that once the camera built-in flash has been popped up, it can be disabled again using the
control and selecting “flash disabled” on the flash mode menu. Turning the Flash
Up control clockwise will not have any effect on the built-in flash.
M (Manual), A (Aperture priority) or S (Shutter Speed priority
please take into consideration that once the flash has been popped up – it cannot be disabled.
Therefore, in such cases, it's recommended to switch to Auto shooting mode to eliminate the flash
Instruction Manual 20200225
ires on every image taken regardless of
instruction manual for further instructions
Up dial counterclockwise in order to pop up the camera built-in flash.
in flash has been popped up, it can be disabled again using the
Turning the Flash Pop-
priority) shooting modes,
it cannot be disabled.
shooting mode to eliminate the flash
Image #21
