FRX100 III Housing Instruction Manual 20141005
10
12.
Function –
Allows you to register 12 functions and recall those functions when shooting.
a.
Push the Function control.
b.
Select the desired function by using multi-selector controls.
c.
Select the setting value by turning the control ring or by using multi-selector controls.
13.
Menu -
Pushing this control activates the camera menu button.
Multi-Selector buttons (14-18)
14.
Display / Up –
Pushing this control activates the camera Display / Up button.
15.
Flash / Right –
Pushing this control activates the camera flash mode / right button.
16.
Exposure Compensation / Photo Creativity / Down –
Pushing this control activates the camera
exposure compensation / photo creativity / down button.
17.
Drive Mode / Self Timer / Left –
Pushing this control activates the camera drive mode / left button.
18.
Select / Rotary Wheel –
c.
Pushing this control activates the camera Select (confirm selection) button.
d.
Rotating this control operates the camera rotary wheel, thereby enabling to alter exposure
values, navigate through menus and other functions assigned to the rotary wheel.
19.
Latch Dial –
This dial ensures the housing is properly closed and watertight sealed, when locked fully
into place. For further instructions, please refer to the sections "Opening the Housing” and “Closing
the Housing”.
20.
Latch Dial Lock (red lever) -
Ensures the secure dial doesn’t accidently open during the dive. For
further instructions, please refer to the sections "Opening the Housing” and “Closing the Housing”.
21.
Custom / Delete –
a.
In playback mode, push this control to delete images.
b.
To assign additional functions for this button, enter the Menu
Custom Settings
Custom
Key Settings
C Button, and select the desired function.
22.
Playback –
Pushing this button allows you to enter the playback mode and to review images or
videos stored on the memory card.
23.
Removable Anti-Glare Hood –
The anti-glare hood enables a better view of the LCD screen when
shooting in bright conditions. It can be removed and installed during the dive. For further
instructions, please refer to the section “Preparing the Housing”.
