Fanstel USB840 Series, Руководство пользователя

Страница: 11 / 14

USB840F/M/X BLE 5, Thread, Zigbee Dongles
Ver 1.00 May 2019
APP_ERROR_CHECK(err_code);
err_code = nrf_drv_ppi_channel_alloc(&ppi_clr_ch);
APP_ERROR_CHECK(err_code);
nrf_drv_gpiote_out_config_t config = GPIOTE_CONFIG_OUT_TASK_TOGGLE(false);
if((gpio_pa_pin == NULL) && (gpio_lna_pin == NULL))
{
err_code = NRF_ERROR_INVALID_PARAM;
APP_ERROR_CHECK(err_code);
}
if(gpio_pa_pin != NULL)
{
if(gpiote_ch == NULL)
{
err_code = nrf_drv_gpiote_out_init(gpio_pa_pin, &config);
APP_ERROR_CHECK(err_code);
gpiote_ch = nrf_drv_gpiote_out_task_addr_get(gpio_pa_pin);
}
// PA config
opt.common_opt.pa_lna.pa_cfg.active_high = 1; // Set the pin to be active high
opt.common_opt.pa_lna.pa_cfg.enable = 1; // Enable toggling
opt.common_opt.pa_lna.pa_cfg.gpio_pin = gpio_pa_pin; // The GPIO pin to toggle tx
}
if(gpio_lna_pin != NULL)
{
if(gpiote_ch == NULL)
{
err_code = nrf_drv_gpiote_out_init(gpio_lna_pin, &config);
APP_ERROR_CHECK(err_code);
gpiote_ch = nrf_drv_gpiote_out_task_addr_get(gpio_lna_pin);
}
// LNA config
opt.common_opt.pa_lna.lna_cfg.active_high = 1; // Set the pin to be active high
opt.common_opt.pa_lna.lna_cfg.enable = 1; // Enable toggling
opt.common_opt.pa_lna.lna_cfg.gpio_pin = gpio_lna_pin; // The GPIO pin to toggle rx
}
// Common PA/LNA config
opt.common_opt.pa_lna.gpiote_ch_id = (gpiote_ch - NRF_GPIOTE_BASE) >> 2; // GPIOTE channel used for
radio pin toggling
opt.common_opt.pa_lna.ppi_ch_id_clr = ppi_clr_ch; // PPI channel used for radio pin clearing
opt.common_opt.pa_lna.ppi_ch_id_set = ppi_set_ch; // PPI channel used for radio pin setting
err_code = sd_ble_opt_set(BLE_COMMON_OPT_PA_LNA, &opt);
! 11