Fanstel ST45 Скачать руководство пользователя страница 21

 

 

Page 18 

  

Scottsdale, AZ 85260 

Warranty Limitation

 

Implied warranties, including those of fitness for a particular purpose and merchantability 
(an unwritten warranty that the product is fit for ordinary use), are limited to one year from 
date of purchase.  We will not pay for loss of time, inconvenience, loss of use of your 
product, or property damage caused by your product or its failure to work, or any other 
incidental or consequential damages.

  

Some states do not allow limitations on how long an 

implied warranty lasts or the exclusion or limitation of incidental or consequential 
damages, so the above exclusions or limitations may not apply to you.   
 

What This Warranty Does Not Cover

 

This warranty does not cover defects resulting from accidents, damage while in-transit to 
or from our Product Service Center, alterations, unauthorized repair, failure to follow 
instructions, misuse, use outside the United States and Canada, fire, flood, and acts of 
God.  We do not warrant your product to be compatible with any particular telephone 
equipment or party line, key telephone systems or more sophisticated customer premises 
switching systems.  If your product is not covered by our warranty, call us for advice as to 
whether we will repair your product and other warranty repair information, including 
required shipping and handling charges.  We, at our option, may replace rather than repair 
your product with a new or reconditioned product of the same or similar design.  The repair 
or replacement product will be warranted for either

 (a) 90 days or (b) the remainder of the 

original one year warranty period, whichever is longer

.

 

 

State Law Rights 

This warranty gives you specific legal rights, and you may also have other rights that vary 
from state to state.

 

 

FCC Registration and Repair Information 

Your new product has been registered with the Federal Communication Commission 
(FCC).  This product complies with standards in Part 68 of the FCC Rules.  The FCC 
requires us to provide you with the following information: 

Connection and Use with the Nationwide Telephone Network 

The FCC requires that you connect your product to the nationwide telephone network 
through a modular telephone outlet or jack.  The modular telephone outlet or jack to which 
the telephone must be connected is a USOC RJ-11C or RJ-11W.  This equipment may not 
be used with Party Line Service or with Coin Telephone Lines.

 

Notification to the Telephone Company 

The FCC requires that upon request of your local telephone company, you provide the 
following information:  a) The “line” to which you will connect the telephone equipment 

Содержание ST45























Отзывы: