Fanstel ST150, Руководство пользователя

Страница: 15 / 26

Page 12
#25
480-948-4928
FANSTEL CORP_
USE SAVE TO END
The 3
rd
line of the display flashes the caller’s name and “
USE SAVE TO END
”. You can
press the
Save
button to save the caller’s number and name into directory without any
change.
If you wish to change the name of caller, press the ◄ button
to move cursor to the first character you wish to modify.
1. Use the keypad to input the first character of the name.
The number and letters on each telephone button are displayed in turn.
2. When the desired character is displayed, you can enter the next character.
3. If you have to use the same button to enter the next character, press the
► button to
move the curser to the next position and enter the next character.
4. If you will use a different button to enter the next character, simply press that button.
The cursor will move to the next position automatically.
5. To insert a space, press the ► button to move the cursor to the right.
6. To re-enter a character, press the ◄ button or the ► button to move the cursor to the
character you wish to modify.
7. After entering all characters, press the
Save
button to save this number/name in the
directory.
Dialing Telephone Numbers from the Directory
You can search for an entry in the directory when the phone is in use or idle.
1. Press
the
Directory
button and the first entry is displayed.
2. Press the
σ
button or the
τ
button until the record you want is displayed.
3. You can also press the appropriate keypad button one or more times to reach the first
character of the name for which you are searching. For example, by pressing
5, 5
(two times), the first record with a name starting with “
K
” is displayed. Press the
τ
button and the next
K
listing is displayed.
4. To dial the number displayed, lift the handset and press the
Dial/Enter
button. If you
press the
Dial/Enter
button without lifting the handset, the speakerphone is activated
automatically before dialing.
5. To leave the directory mode at any time, press the
Goodbye
button.
Deleting Entries in the Directory
To delete an individual entry in the directory, press the
Delete
button once when the entry
is displayed. The displayed entry is permanently erased.
To delete all of the entries stored in the directory:
1. Press
the
Directory
button.
2. Press and hold the
Delete
button for 4 – 5 seconds until “
DELETE ALL!
” appears. All
entries in the directory are permanently erased.