FANOX SIA-B Series, Руководство пользователя

Страница: 55 / 138

www.fanox.com Rev. 07 55/138
5.8. Configurable Inputs
The SIA-B is provided with 3 digital inputs that can be configured by the user from the HMI or by
using the SICom program.
The default input configuration is shown below:
Logic In1 In2 In3
52 a - - -
52 b - - -
External trip
√
- -
Block 50/51 - - -
Block 50/51G - -
Settings group 1 -
√
-
Settings group 2 - - -
Reset - -
√
Logic Signal 1 - - -
Logic Signal 2 - -- -
Logic Signal 3 - - -
Logic Signal 4 - - -
5.9. Digital Outputs
Optionally (to be selected for each model), the SIA-B relay is provided with 3 configurable outputs.
By default, the configuration is as follows:
•
Output 1: it is activated if the relay is not ready (Watchdog)
•
Output 2: it is activated when any of the phase functions trip
•
Output 3: it is activated when any of the ground functions trip
To get the outputs to be operative it is required Single phase
→
270 mA or Three phases
→
90 mA.
Once the relay detects these levels of current these outputs are instantaneously operative.