Fanmaster ULV Series, Инструкция по эксплуатации

Страница: 6 / 8

OPERATION & USE
Do not operate the Fogger for more than 20 minutes at a time.
Make sure the appliance is turned off and not connected to the
power supply before adding the solution.
Please ensure you are wearing the correct Personal Protective
Equipment (PPE) when spraying such as masks, goggles, gloves
1. Add solution (water or oil based) by unscrewing the cap off
the tank and pouring solution into the tank. Screw the cap
back on and ensure it is sealed correctly.
Check the solutions manufactures instruction in terms of portion/mixture
control.
2. Set the adjustable misting knob to Max, once turned on
adjust accordingly.
3. Connect to the power supply.
4. Turn on the switch . (to turn off
O )
5. For Sanitisation:
During the spraying operation, the operators walking speed
should be stable, do not run. Slow control is required when
spraying side to side or up and down. Do not spray people or
animals. Stand back 1.5m when spraying near appliances and
do not point and hold directly at appliances.
After use:
Any remaining solution should be poured out and disposed of
correctly. Add water and spray for 2-3 minutes until clean. Store
away.
Troubleshooting:
If not spraying first check the cap on the tank is correctly
sealed. Check if lines are blocked, if so remove and clean.