4. ASSEMBLING & OPERATING INSTRUCTIONS
2. PRODUCT DESCRIPTION & SPECIFICATIONS
1.
Place the fan on an even surface.
2. Connect the plug to the relevant power source.
3. The fan is not suitable in environments that is too moist or corrosive.
4. The fan has 3 speeds which can be changed by rotating the speed control
switch. The numbers 0, 1, 2 and 3. 0 = OFF, 1 = Slow, 2 = Medium, 3 = Fast speeds.
5. Angle adjustment can be adjusted by loosening the adjusting knobs on the side
of the fan, the fan can go up or down.
Operating Instructions
Remove the appliance from the carton. If the appliance is damaged, please
contact Fanmaster or where you purchased the appliance from.
Assembly Instructions
1. Attach the stand to the rear fan cover at the pivot point with parts 6, 7 & 8.
2. Attach the front fan cover with locking clips.
Environment of Use
1. The max relative humidity is 90% (when in 25°C).
2.
Below 1000 metres altitude.
Maintenance
1. To ensure prolonged safe use ensure you have this unit inspected, cleaned & moving parts
lubricated by a qualified person after every 1000 hours of use.
2.
Regularly inspect the cord & plug & do not use if damaged. A license electrician is
required to repair or replace the cord & plug.
3.
Any other repairs or maintenance must be performed by a qualified person.
