Fanmaster CF2000 Скачать руководство пользователя страница 3

PLEASE READ INSTRUCTIONS CAREFULLY.  

• 

PLACE INSTRUCTION MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. DO NOT ALLOW ANYONE 

WHO HAS NOT READ THESE INSTRUCTIONS TO ASSEMBLE, ADJUST OR OPERATE THIS HEATER. 

• 

IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT 

IN CAUSING PROPERTY DAMAGE, SERIOUS INJURY OR LOSS OF LIFE.  

• 

FAILURE TO COMPLY WITH THE PRECAUTIONS AND INSTRUCTIONS PROVIDED WITH THIS HEATER, 

CAN RESULT IN DEATH, SERIOUS INJURY AND PROPERTY LOSS OR DAMAGE FROM HAZARDS OF FIRE, 

EXPLOSION, BURN, AND/OR ELECTRICAL SHOCK 

• 

ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THE INSTRUCTIONS SHOULD USE OR SERVICE 

THIS HEATER. IF YOU NEED ASSISTANCE OR REQUIRE HEATER INFORMATION SUCH AS AN INSTRUCTION 

MANUAL, LABELS, ETC. CONTACT FANMASTER.  

• 

DO NOT STORE OR USE GASOLINE, PETROL OR ANY OTHER FLAMMABLE OR COMBUSTIABLE VAPORS 

AND LIQUIDS IN THE VICINITY OF THIS HEATER. 

• 

FIRE, BURN, INHALATION, AND EXPLOSION HAZARD. KEEP SOLID COMBUSTIBLES, SUCH AS BUILDING 

MATERIALS, PAPER OR CARDBOARD, A SAFE DISTANCE AWAY FROM THE HEATER AS RECOMMENDED 

BY THE INSTRUCTIONS. NEVER USE THE HEATER IN SPACES WHICH DO OR MAY CONTAIN VOLATILE 

OR AIRBORNE COMBUSTIBLES, OR PRODUCTS SUCH AS GASOLINE, SOLVENTS, PAINT THINNER, DUST 

PARTICLES OR UNKNOWN CHEMICALS  

• 

NOT FOR DOMESTIC OR RECREATIONAL VEHICLE USE 

• 

THE ELECTRICAL SYSTEM TO WHICH THE APPLIANCE IS CONNECTED MUST COMPLY WITH LOCAL 

REGULATIONS. A RESIDUAL-CURRENT DEVICE (RCD) MUST BE INSTALLED 

• 

UNPLUG THE APPLIANCE BEFORE PERFORMING ANY MAINTENANCE OPERATIONS.  

• 

ALWAYS CHECK THE POWER CABLE BEFORE USING THE APPLIANCE. IT MUST NOT BE BENT, TAUT, 

STRETCHED, CRUSHED OR ANY WAY DAMAGED.  

• 

IF THE POWER CORD AND/OR PLUG IS DAMAGED, IT MUST BE REPLACED BY FANMASTER, A SERVICE 

AGENT OR A QUALIFIED PERSONS. 

• 

DO NOT COVER THE FAN HEATER  

• 

THE FRONT OUTLET IS VERY HOT DURING OPERATION. DO NOT TOUCH! BURN DANGER. 

• 

DO NOT LEAVE THE HEATER UNATTENDED WHEN IN USE. 

• 

NEVER USE THE HEATER WITH WET HANDS OR WHEN EITHER THE HEATER OR THE POWER CABLE IS WET.  

• 

CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE HEATER. 

• 

THE HEATER IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL, 

SENSORY OR MENTAL CAPABILITIES, OR LOCK OF EXPERIENCE & KNOWLEDGE. 

• 

Parts of the heater may exceed 200° , contact with the heating tube, reflector, or metal parts near 

the heating tube, may cause severe BURNS . To avoid burns, do not let bare skin touch hot surface 

• 

NEVER place hands under the heating elements. ALWAYS allow heating element to cool at least 10 

minutes before touching the heating tube or adjacent parts. 

• 

This product contains recyclable materials. Do not dispose this product as unsorted municipal 

waste. Please contact your local municipality for the nearest collection point

• 

A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or 

flammable liquids are used or stored. 

1. GENERAL SAFETY RULES & WARNINGS

Содержание CF2000















Отзывы: