FanJu FJ3373, Руководство пользователя

Страница: 5 / 12

FJ3373 Manual
Initial Operation:

Open Weather Station battery compartment cover

Insert 2 x AA batteries observing polarity [ “+” and “ –“ marks]

When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, and you will hear a
beep tone, and detect indoor temperature & humidity.

The Weather Station will now start to make a connection to the outdoor remote sensor. This operation takes about 3
minutes and is displayed by a flashing reception RF antenna symbol in the “OUTDOOR” display area on the receiver.

This now, replace Wireless Outdoor Sensor battery compartment cover ,Open Weather Station battery compartment
cover ,Insert 2 x AA batteries observing polarity [ “+” and “–“ marks]
Manual Time Setting:

Press once “ ” button, can switch the display calendar or second.

Press and hold down the “ ” button for 2 seconds, the unit of temperature display starts to flash. Now use the “
▲
”
and “▼” button to set the temperature of the unit, the unit of temperature can be set to “°C” or “°F”

Press “ ” to confirm your setting, the unit of pressure display starts to flash. Now use the “
▲ ” and “▼” button to set
the pressure of the unit, the unit of t pressure can be set to “hPa” or “inHg”

Press “ ” to confirm your setting, the 12/24 hour mode display starts to flash. Now use “
▲ ” and “▼” buttons to set
the correct 12/24 hour mode.

Press “ ” to confirm your setting, the Hour display starts to flash. Now use “
▲
” and “▼” buttons to set the correct
hour.

Press “ ” to confirm your setting, the Minute displays starts to flash. Now use“
▲ ” and “▼” buttons to set the correct
minute.

Press “ ” button to confirm your setting, the Month and Date icon display starts to flash. Now use “
▲ ” and “▼”
buttons to set the date display on Month/Date or Date/Month.

Press “ ” button to confirm your setting, the Year display 2014 starts to flash. Now use “
▲ ” and “▼” buttons to set
the correct year.

Press “ ” button to confirm your setting, the Month display starts to flash. Now use “
▲ ” and “▼” buttons to set the
correct month.

Press “ ” button to confirm your setting, the Date display starts to flash. Now use “
▲
” and “▼” buttons to set the
correct date.

Press “ ” button to confirm your setting, the language selection for the Weekday displays starts to flash. Now use