SF120 Semi-Flush Light Fixture
Instructions Sheet
1.
Before discarding packing materials, be certain all parts
have been removed.
CAUTION
Do not install or use fixture if any part is damaged or
missing. This product is designed to use only those
parts supplied with this product and/or any accessories
designated specifically for use with this product by
Fanimation. Substitution of parts or accessories not
designated for use with this product by Fanimation
could result in personal injury or property damage.
Contact your retail store for missing or damaged parts.
Electrical Requirements
Your new light fixture will require a grounded
electrical supply line of 120 volts AC, 60 Hz, 15
amp circuit.
Maintainance Requirements
Periodic light dusting of the light fixture and glass is
recommended. A feather duster will work best. Avoid
using water, cleansers, or harsh rags, which can ruin
the finish and fixture.
How To Order Parts
When ordering repair parts, always
give the following information:
• Part Number
• Part Description
• Fan Model Number
Contact your retail store for repair parts.
Item #
Description
Qty.
Part #
1
Semi-Flush Fixture
1
SF120
2
Hardware Parts,
contains
1
HDWSF120
Crossbar w/ Gnd Screw
1
Screw, junction box
2
Rod, Threaded
2
Rubber Washer
1
Hex Nut
1
Knurled Nut
2
Lockwasher
2
Bowl Cap
1
Finial Nut
1
Wire Connector
2
2
1
Parts List
NOTE:
The illustration shown is not to scale or its actual
configuration may vary
SF120PW with
G454 (sold seperately)
